World Imports WI237306 Installation Guide

Browse online or download Installation Guide for Unknown World Imports WI237306. World Imports WI237306 Installation Guide User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 1
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
FLUSH MOUNT FIXTURE
INSTALLATION INSTRUCTIONS
Please read carefully and save these instructions, as you may need them at a later
date.
GENERAL
All electrical connections must be in accordance with local and National Electrical Code
(N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections obtain the
services of a qualified electrician.
Remove the fixture and the mounting package from the box and make sure that no parts are
missing by referencing the illustrations on the installation instructions.
ASSEMBLY AND INSTALLATION
1. Screw the #8-32 IPS FIXTURE SCREWS (4) onto the MOUNTING BRACKET (2), and
thread the #8-32 HEX NUTS (13) onto the #8-32 FIXTURE SCREWS (4). Do not tighten
the #8-32 IPS HEX NUTS (13) at this time.
2. Pull the SUPPLY WIRES (5 & 6) and the SUPPLY GROUND WIRE (7) out from the
OUTLET BOX (1) and attach the MOUNTING BRACKET (2) to the OUTLET BOX (1)
using the slotted holes on the MOUNTING BRACKET (2) and the #8-32 IPS
MOUNTING SCREWS (3) provided.
3. Place the CANOPY (11) over the OUTLET BOX (1) and onto the #8-32 IPS FIXTURE
SCREWS (4) and adjust the #8-32 IPS FIXTURE SCREWS (4) until they protrude out
from the CANOPY (11) 1/4". Remove the CANOPY (11) and secure the position of the
#8-32 IPS FIXTURE SCREWS (4) by tightening the #8-32 IPS HEX NUTS (13) against
the MOUNTING BRACKET (2).
4. Attach the BLACK SUPPLY WIRE (6) to the BLACK FIXTURE WIRE (9) by using the
WIRE CONNECTOR (16). In the same manner, attach the WHITE SUPPLY WIRE (5)
to the WHITE FIXTURE WIRE (8). Connect the FIXTURE GROUND WIRE (10) to
the SUPPLY GROUND WIRE (7) using a WIRE CONNECTOR (16) (not included).
ASSEMBLY AND INSTALLATION (Continued)
5. Carefully tuck all wiring back into the OUTLET BOX (1). Place the CANOPY (11) back onto
the #8-32 IPS FIXTURE SCREWS (4) and secure the CANOPY (11) into place using the
DECORATIVE NUTS (12) provided.
6. Thread the THREADED PIPE (19) onto the coupling. Feed the BOTTOM FOUNT (17) onto the
THREADED PIPE (19), Secure the FINIAL (18) onto the THREADED PIPE (19) .
7. Install the bulbs. (See markings and/or labels on the fixture for maximum wattage DO NOT
OVER LAMP.).
8. Install the CRYSTAL CHAIN (15) and CRYSTAL (14) as shown below.
INSTALLATION IS NOW COMPLETED
CAUTION
Turn off the main power at the circuit breaker before installing the fixture, in order to prevent
possible shock.
1. OUTLET BOX
2. MOUNTING BRACKET
3. #8-32 IPS MOUNTING SCREW
4. #8-32 IPS FIXTURE SCREW
5. WHITE SUPPLY WIRE
6. BLACK SUPPLY WIRE
7. SUPPLY GROUND WIRE
8. WHITE FIXTURE WIRE
9. BLACK FIXTURE WIRE
10. FIXTURE GROUND WIRE
11. CANOPY
12. DECORATIVE NUT
13. #8-32 HEX NUT
14. CRYSTAL
15. CRYSTAL CHAIN
16. WIRE CONNECTOR
17. BOTTOM FOUNT
18. FINIAL
19. THREADED PIPE
Page view 0
1

Summary of Contents

Page 1 - INSTALLATION INSTRUCTIONS

FLUSH MOUNT FIXTUREINSTALLATION INSTRUCTIONSPlease read carefully and save these instructions, as you may need them at a later date.GENERALAll electri

Comments to this Manuals

No comments